An interesting demonstration of how planking and other wood working used to be done using steam and vintage machinery from down the years.  There will also be an extensive collection of vintage tools on display.

Drag Saw

Rack Saw Demonstrations

There will also be rack saw demonstrations through the day.  The rack saw was used to saw up large tree trunks to provide a source of timber.  The rack saw differs from a conventional saw bench in that the large trunks are held on a carriage and the whole carriage moves along on rollers.  The blade would have been driven from a fairly large portable steam engine or traction engine

Wade Dragsaw

There will be demonstrations on a Wade Dragsaw, used for forestry logging around 1923.  These will be timed demonstrations throughout the weekend, cutting circular discs 3/3ft in diameter and 2-3 inches thick.  The discs will be available for sale and are ideal for making table tops. 

Tractor with Belt Driven Band 

vintage chainsaws


Stationary Engines

Collection of vintage chainsaws


And here’s how it’s done today!

Wood-Mizer UK

Wood-Mizer UK will be demonstrating a Mobile LT20 sawmill, capable of cutting 80cm diameter logs, 6.1m long.

Image result for wood-mizer ukWood-Mizer are the industries leaders in narrow band technology, allowing greater recovery from each log, whilst reducing capital outlay and running costs.

Wood-Mizer also produce a range of secondary processing equipment, allowing you to take your timber “From Forest to Final Form”

Wood-Mizer are the only narrow band sawmill manufacturer to produce their own blades


Alaskan Wood Mill

An Alaskan mill or chainsaw mill is a type of sawmill that is used by one or two operators to mill logs into lumber for use in furniture, construction and other uses.

The mill attachment consists of a pair of rails which are attached to bar of the chainsaw. The rails ride on a plank and then a alaskan saw millpreviously cut surface and guide the chainsaw blade through the log at a consistent depth so that planks of a predetermined thickness are cut. The distance between the rails and the bar determines this thickness and it can be adjusted by moving the rails along a post at each end of the mill attachment. During use it is important that the rails extend out past the ends of the log so the cut has support the entire time.

Small mills use a single chainsaw and can be handled by a single operator. Larger mills use two chainsaw power heads, one on either side of the attachment and these require two operators. This larger style of mill requires a special bar which allows the two chainsaw heads to be attached at either end. The width of the plank that can be cut is determined by the length of the bar, up to 34 inches (86 cm) so for logs having a large diameter, the longer bar is necessary. Also a special chain is designed to make rip cuts rather than the usual chainsaw chain which is for cross-cutting.

Our Other Events